| Flammable/Combustible | No |
| Water Solubility | 100% |
| Contains Terpenes | No |
| SCAQMD Certified | Yes |
| lbs/glpH @ Concentrate | 12.0-12.3 |
| pH @ 3:1 Dilution | 10.0-11.0 |
| Density lbs. /per gal | 8.9 lbs/gl |
| Flammable/Combustible | No |
| Water Solubility | 100% |
| Contains Terpenes | No |
| SCAQMD Certified | Yes |
| lbs/glpH @ Concentrate | 12.0-12.3 |
| pH @ 3:1 Dilution | 10.0-11.0 |
| Density lbs. /per gal | 8.9 lbs/gl |
WHAT IS IT:
4130 - Industrial Cleaner & Degreaser is formulated with ingredients that have strong cleaning properties and can penetrate and lift away stubborn residues, leaving surfaces clean and free from grease and grime. It is formulated to clean surfaces before painting without leaving a soapy residue behind that interferes with coating adhesion developed to clean surfaces before painting. It will not leave a soapy residue behind that interferes with coating adhesion.
WHAT IS IT USED FOR:
It is formulated for industrial, commercial, and interior and exterior pressure washing applications. Aerogreen 4130 - Industrial Cleaner & Degreaser is essential for maintaining cleanliness and removing stains from surfaces. It can be used as a cleaner before inspection and repairs for equipment by removing the oils, dirt, grease, waxes, polishing compounds, salts, soluble oils, and drilling and cutting compounds from the surface. Aerogreen 4130 - Industrial Cleaner & Degreaser can be safely used in between primer and topcoat and as a final cleaning shipping.
HOW IT WORKS:
It reduces surface tension, dissolves or breaks down substances, suspends oily residues, and lifts and loosens dirt. Aerogreen 4130 - Industrial Cleaner & Degreaser combines chemical properties and mechanisms to achieve thorough and efficient cleaning results.
APPLICATION GUIDELINES:
Ambient temperature: Apply between 40-90 degrees °F
Use as pre-soak: Dilute Aerogreen 4130 3:1 with water. Spray the area to be cleaned using a pump sprayer. Let soak for 10-15mins. Rinse using a pressure washer (1000-3000psi). Dry with an air hose or clean cloth before painting.
Use a pressure washing system: Wet the surface to be cleaned with water. Set dilution jets between 5-20%, depending upon the level of contaminants to be removed. Drop the feeder hose into Aerogreen 4130 - Industrial Cleaner & Degreaser solution to draw into the pressure washer. Clean the area and dry it with air or use a clean cloth.
Adjust the pressure: To wash dirt, grime, and soils, keep the pressure level between 1500psi and 1800psi.
Choosing the correct nozzle: Wide-Fan nozzles are often preferred when pressure washing exterior painted surfaces. Available in yellow (15°), green (25°), white (40°), or black (65°) fan tips. Red (0°) is not recommended for washing.
Divide large areas: Break large areas into sections and wash from the top down, using long strokes. To avoid damaging walls, keep the nozzle at a 45° angle and spray from a minimum distance of 12 inches. If pressure is increased, move the nozzle further away from the surface.
Scrub heavy soiled areas: Use a rotating scrub brush, power broom, or a sponge in conjunction with Aerogreen concentrate to remove stains or pre-treat areas before the final power washing.
COVERAGE:
Over 800 SQFT when mixed 3:1. (3 gallons water & 1-gallon Aerogreen 4130) with use of pump sprayer.
USE IT ON THE FOLLOWING SURFACES:
- Stucco
- Steel
- Porcelain
- Stone
- Brick
- Vinyl
- Aluminum
- Wood
SAFETY/CAUTION:
Rubber gloves are recommended to prevent drying of the skin. Goggles are recommended to protect eyes if splashing is expected. When heated above 125 F, mechanical or local ventilation is required. When using products in steam cleaning and/or pressure washing applications, wear a rainsuit and boots to keep clothes dry. Harmful if swallowed. Avoid getting into the eyes. If contact occurs, flush with running water. If irritation persists, get medical attention. It may cause skin dryness with prolonged use; wash hands with cold water and apply hand lotion.
