AEROGREEN 4015 Concentrated Aircraft Exterior Cleaner is water-based, readily biodegradable aircraft and helicopter cleaner that safely removes soils from all painted and unpainted plastic and metal surfaces better than traditional hazardous solvents. AEROGREEN 4015 is powerful enough to remove the most stubborn dirt and grime. Diluted with water 8 to 1, this cost effective, user-friendly, non-toxic cleaner, can be easily applied by brush, foam generator, mop, spray or sponge. AEROGREEN 4015 quickly removes exhaust residue, oily soot and oxidized organic fluids, leaving your aircraft ‘showroom’ clean, easier to maintain and safer to fly.

MFG PART      ORDER NUMBER      CONTAINER SIZE
4015P              110469042                  5 Gallon Pail
4015D              110469043                  55 Gallon Drum
4015T275        110469044                  275 Gallon Tote
4015T330         110469124                 330 Gallon Tote

NEW Datasheet SDS

AEROGREEN 4035 Runway Rubber Remover is a 100% biodegradable, eco-friendly cleaning solution that emulsifies rubber from the runway surface dissolving the rubber residue into the solution. When combined with heavy duty sweeper / broom scrubbing action or hydro agitation, AEROGREEN 4035 thoroughly removes runway rubber residue, making the touch down zone safe for landing aircraft. It is a residue-free, non-hazardous, non-flammable, non-combustible solution that contains no caustic ingredients, so it won’t harm metals, runway pavement seals and caulking compounds, runway lights, landing aircraft or airport personnel.

MFG PART      ORDER NUMBER      CONTAINER SIZE
4035P             110469135                   5 Gallon Pail
4035D             110469136                   55 Gallon Drum
4035T275        110469137                  275 Gallon Tote
4035T330        110469138                  330 Gallon Tote

NEW Datasheet SDS

In order to Go Green, and reduce VOC’s in the paint industry, solvent based paints are rapidly being replaced by water-based paints. AEROGREEN’s 4110 Paint Prep Cleaner, the first non-toxic, water-based product on the market designed to safely clean and prepare all surfaces for paint, works better than traditional toxic cleaners with the industry’s new paints. Because the paint and AEROGREEN 4110 both use water-based technology, there are very compatible, so the paint bonds better to the surface, leaving little or no imperfections in the painted surface. When used alone or in combination with the other AEROGREEN products, cleaning the surface with AEROGREEN 4110 is the final and most important step to ensure a professional flawless finish.

MFG PART      ORDER NUMBER      CONTAINER SIZE
4410QT12       110469139                 32 Ounce Bottle
4110G4            110469140                 1 Gallon Bottle
4110P               110469141                 5 Gallon Pail
4110D               110469142                55 Gallon Drum
4110T275         110469143                 275 Gallon Tote
4110T330         110469144                 330 Gallon Tote

NEW Datasheet SDS

AEROGREEN 4130 High Pressure Cleaner Degreaser is a concentrated, very powerful, eco-friendly, aqueous cleaner. It can be used to thoroughly clean all types of vehicles, heavy machinery and industrial equipment. It is also very effective when cleaning large surfaces such as exterior buildings, interior walls, ceilings, floors and stairways. When used with both cold and heated high pressure washers, AEROGREEN 4130 attacks, quickly breaks down and safely removes dirt, concrete dust, exhaust soot, oils, greases, hydraulic fluids and fuel residue, as well as a variety of soils. It dries quickly, leaving a residue free clean surface. AEROGREEN 4130 is also very effective when used as a pre-soak solution prior to steam cleaning.

MFG PART      ORDER NUMBER      CONTAINER SIZE
4130G4            110469145                  1 Gallon Bottle
4130P              110469146                  5 Gallon Pail
4130D              110469147                  55 Gallon Drum
4130T275        110469148                  275 Gallon Tote
4130T330        110469149                  330 Gallon Tote

 NEW Datasheet ESP    SDS

AEROGREEN 4160 Parts Washer Degreaser is designed to provide superior cleaning of mechanical parts, engine support equipment, automotive and aircraft components. It’s very powerful formula makes it easy to remove oils, grease and other tough soils. AEROGREEN 4160 is mixed with water in a dip or immersion tank, ultrasonic tank, or in-line system. Then the parts are cleaned in the solution. The solution can last for weeks depending on the frequency of use and the size of the tank. AEROGREEN 4160 contains a rust inhibitor. After the part has been cleaned it can be immediately worked on or shelved for some time without any corrosion forming on the surface.

MFG PART      ORDER NUMBER      CONTAINER SIZE
4160P               110469154                 5 Gallon Pail
4160D               110469155                55 Gallon Drum
4160T275         110469156                 275 Gallon Tote
4160T330         110469157                 330 Gallon Tote

NEW Datasheet ESP  SDS EN/IT

AEROGREEN 4175 Ink and Coating Remover has a special additive in its non-toxic, water soluble formula that makes it very effective in removing tars; solvent, oil and water based inks; and adhesives on equipment, machines and floors that need to be cleaned, or are about to be painted. Before cleaning the object to be painted with AEROGREEN 4175, use AEROGREEN 4110 Paint Prep Cleaner to remove all the oils, dirts and greases on the surface first. The tars, inks and adhesives left behind are then cleaned away using AEROGREEN 4175. After that, clean the piece again with AEROGREEN 4110 to remove any residue left behind from AEROGREEN 4175 to ensure that the paint properly adheres to the surface.

MFG PART      ORDER NUMBER      CONTAINER SIZE
4175G4           110469158                  1 Gallon Bottle
4175P              110469159                  5 Gallon Pail
4175D              110469160                 55 Gallon Drum
4175T275        110469161                  275 Gallon Tote
4175T330        110469162                  330 Gallon Tote

NEW Datasheet ESP      SDS   

AEROGREEN AC-10 Rust Remover and Metal Prep is specially formulated to remove rust or any type of oxidation on the surface of a metal part prior to painting. Depending on the surface to be cleaned, this clear, odorless, innovative product can be diluted with water and brushed on, sprayed on, or used in cold or heated dip tanks for the best results. AEROGREEN AC-10 is also used when a part has been welded prior to painting. The welded area of the part is wiped down with AEROGREEN AC-10 to prep the metal. After removing rust or prepping the metal with AEROGREEN AC-10, the part is given a final wipe down with AEROGREEN 4110 prior to painting.

MFG PART      ORDER NUMBER      CONTAINER SIZE
AC10G4            1104691963               1 Gallon Bottle
AC10P               110469164                 5 Gallon Pail
AC10D               110469165                55 Gallon Drum
AC10T275         110469166                 275 Gallon Tote
AC10T330         110469167                 330 Gallon Tote

NEW Datasheet ESP   SDS