Better Solutions = Better Finish™

 

Sherwin-Williams line of AEROGREEN Specialty Cleaners, manufactured by Aerogreen Solutions, gives you the tools to safely clean and prepare almost any surface for a finished coat of paint. Sherwin-Williams understands how important it is to properly clean and prepare a surface prior to painting to ensure the best bond between the coating and the surface. The vast majority of coating failures can be directly attributed to inadequate surface preparation, which affects coating adhesion.

It’s just as important to Sherwin-Williams that the products they sell are environmentally sound, cost effective and safe solutions that reduce any negative impact on the environment, while providing equal or better performance than their traditional toxic counterparts. So how do you get the best finish possible, and still ‘Go Green’? It’s simple … prep the job with AEROGREEN’s highly effective, eco-friendly, water based paint prep cleaners and degreasers listed below, and finish the job with Sherwin-Williams products.

4110 Paint Prep Cleaner

AEROGREEN® is the best way of cleaning metal of oils, dirt, grease, waxes, polishing compounds, salts, soluble oils, drilling and cutting compounds, and other surface contaminants that will prevent the coatings from adhering to metal surfaces. AEROGREEN® is for use as a Pre-Paint Cleaner before coatings, in-between primer, and topcoat, and as a final clean to make items customer ready. The most common method of surface Preparation is solvent wipe-on, wipe-off. AEROGREEN® 4110 Paint Prep is a drop-in replacement for solvent-type cleaners such as Lacquer thinner, MIBK, MEK, IPA, Acetone, and other hazardous high VOC solvents.

SW PART NUMBERS

32 Ounce   – SW592-2810
Gallon        – SW592-2828
5 Gallon     – SW592-2554
55 Gallon   – SW592-2802
330 Gallon – SW592-2836

Datasheets – NEW Industrial-Automotive-Wood | SDS | Certifications

4110 Ready Wipes

AEROGREEN® is the best way of cleaning metal of oils, dirt, grease, waxes, polishing compounds, salts, soluble oils, drilling and cutting compounds and other surface contaminants that will prevent the cuttings from adhering to metal surfaces as outlined in SSPC-SPI International Standards. AEROGREEN® is for use as a Pre-Paint Cleaner prior to coatng, in-between primer and top coat, and as a final clean to make items customer ready. The most common method of surface Preparation is solvent wipe-on, wipe-off. AEROGREEN® 4110 RW Paint Prep is a drop in replacement for solvent type cleaners such as Lacquer thinner, MIBK, MEK, IPA, Acetone and other hazardous high VOC solvents.

SW PART NUMBERS

Gallon 4-per case   – SW1013-11306

 

Datasheets – NEW Industrial-Automotive-Wood | SDS | Certifications

4130 High Pressure Cleaner Degreaser

AEROGREEN® 4130 High-Pressure Cleaner Degreaser is a concentrated cleaner used to prepare surfaces before powder coating and for large surfaces such as exterior buildings, interior walls, ceilings, floors, and stairways, for paint. When used with both cold and heated high-pressure washers, it quickly breaks down. It safely removes dirt, concrete dust, exhaust soot, oils, greases, hydraulic fluids, and fuel residue, as well as a variety of soils, leaving a residue-free clean surface ready to be painted.  When signs of rust are evident after cleaning it is recommended to use AEROGREEN® AC-10 Rust Remover to removed rusted areas before painting.

SW PART NUMBERS

Gallon        – SW592-2851
5 Gallon     – SW592-2885
55 Gallon   – SW592-2919
330 Gallon – SW592-2927

NEW Datasheet | SDS | Certifications

4160 Parts Washer Degreaser

AEROGREEN® 4160 Parts Washer Degreaser designed to provide superior cleaning of mechanical parts, engine support equipment, and automotive components are to be painted. AEROGREEN® 4160 is a concentrate to be diluted with water for use in dip or immersion tanks, ultrasonic tanks, or in-line systems, for cleaning parts.  The solution can last for weeks, depending on the frequency of use and the size of the equipment tanks. AEROGREEN® 4160 contains a rust inhibitor so that the part can be worked on or shelved for some time before painting without any corrosion forming on the surface. It is recommended that the parts that are not painted immediately after cleaning get a final wipe down with AEROGREEN® 4110 Paint Prep just before painting to remove any surface dust or dirt that has accumulated on the surface that can interfere with paint adhesion.

SW PART NUMBERS

5 Gallon     – SW592-2950
55 Gallon   – SW592-2976
330 Gallon – SW592-2984

NEW Datasheet | SDS EN/IT | Certifications

AC-10 Rust Remover and Metal Prep

AEROGREEN® AC-10 Rust Remover and Metal Prep specially formulated to remove rust or any type of oxidation on the surface of a metal part before painting. Rust must be removed to prepare the surfaces before painting or applying new protective coatings, or the rust will continue to grow under the coating.   AEROGREEN® AC-10 is a phosphoric acid and detergent blend formulated to clean metal surfaces. Removes rust and profile steel, cast iron, galvanized metals, zinc, high polished aluminum to prepare the metal surface for a subsequent chemical coating.  For use before liquid and powder coating finishing systems. Ideal for all Industrial, Automotive, Agriculture, Transportation Industries, and Marine Industries.  Depending on the surface to be cleaned, this clear, odorless, innovative product can be diluted with water and brushed on, sprayed on, or used in cold or heated dip tanks to remove rust from metal surfaces. AEROGREEN® AC-10 for use to clean weld sections before painting to ensure excellent paint adhesion. The welded area of the piece is wiped down with AEROGREEN® AC-10 to prep the metal. After removing rust or prepping the metal with AEROGREEN® AC-10, the part is given a final wipe down with AEROGREEN® 4110 before painting.

SW PART NUMBERS

1 Gallon     – SW938-8927
5 Gallon     – SW592-3081

55 Gallon   – SW592-3099
330 Gallon – SW592-3107

NEW Datasheet | SDS

4175 UV Line and Roll Coater Cleaner

AEROGREEN® 4175 removes inks and coating from a variety of surfaces, and for use in cleaning automatic roll coating machines. Roll coaters are used to apply liquid adhesives, paints, oils, and coatings such as varnish or clear finishes to a variety of substrates. Roll coaters can take many forms, from simple paint rollers to sophisticated coating machines with multiple rollers. For the line to continue to run at a constant speed, the various parts of the roll coater must be continuously cleaned. Acetone and other hazardous solvents have been the standard cleaning solution for these units.  AEROGREEN® 4175 is a direct drop-in replacement for use in industries such as industrial wood, cabinet makers, wood flooring manufacturers, aluminum, paper, card stock, wallpaper, magazines, glass, and plastics.

SW PART NUMBERS

1 Gallon     – SW943-3715
5 Gallon     – SW592-2992

55 Gallon   – SW592-3057
330 Gallon – SW592-3073

NEW Datasheet | NEW Ready To Use Wipes | SDS

AC-10 Ready Wipes Rust Remover and Metal Prep

AEROGREEN® AC-10 Ready Wipes Rust Remover and Metal Prep is a phosphoric acid and detergent blend formulated to clean metal surfaces, remove rust, and profile steel, cast iron, galvanized metals, zinc, high polished aluminum prior to paint or to prepare a surface for a subsequent chemical coating, including liquid, and powder coating finishing systems. For use in Wipe on Wipe off Preparation of Surface Prior to Painting. The rust must be removed to prepare the surfaces prior to painting or applying new protective coatings or the rust will continue to grow under the coating. Ideal for all Industrial, Automotive, Agriculture, Transportation Industries and Marine Industries.

SW PART NUMBERS

1 Gallon Tub – 4 per Crate     – SW1015-59540

NEW Datasheet | SDS

4180 Paint & Graffiti Remover

AEROGREEN® 4180 PAINT REMOVER is a liquid paint remover developed to remove most industrial, water reducible paints and primers including, lacquers, acrylic enamels, solvent-based alkyd paints, high & low gloss urethanes, epoxy paints, powder coat paints, inks, adhesives and a variety of other coatings from many types of substrates including steel, cast iron, aluminum, concrete, masonry, and plastics.

AEROGREEN® 4180 PAINT REMOVER works by penetrating through the old coating to break the bond of the coating to the substrate instead of dissolving the coating. This process, called delaminating, is not only safer to use but allows a more accessible collection of the residue for more efficient residue clean up and disposal.

 

 

 

SW PART NUMBERS

Gallon        – SW1005-19388
5 Gallon     – SW1004-44470

NEW DatasheetSDS

Introducing our NEW Natural World Floor Surface Cleaners and Maintenance Oils

4200 Wood Floor Maintenance Oil

AEROGREEN® 4200 WOOD FLOOR MAINTENANCE OIL keeps the natural beauty of oiled wood floors, while maintaining and protecting the floor with a unique blend of natural oils that penetrate into the wood, highlighting the natural grain while providing lasting protection. AEROGREEN® 4200 contains no solvents or hazardous chemicals and can be applied by hand with a clean cloth, clean mop, lambs wool pad or paint roller. All applicator tools can be cleaned out with plain soap and water.

Datasheet | SDS

4210 Revitalizer Oil for Wood Floors

AEROGREEN® 4210 REVITALIZER OIL FOR WOOD FLOORS is used for regular cleaning and maintenance of oiled floors to enhance the nautral beauty. AEROGREEN® 4210 penetrates into the wood and provides the surface with a protective finish, while adding essential oils to nourish the wood as you clean. AEROGREEN® 4210 contains no solvents or hazardous chemicals and has a light, pleasant odor, it can be easily applied by hand with a clean mop or lambs wool pad.

Datasheet | SDS

4220 Wood Cleaner

AEROGREEN® 4220 WOOD FLOOR CLEANER is a safe and effective ready to use cleaner that provides a complete clean to wood floors by gently and effectively removing dust, dirt and grime. AEROGREEN® 4220 dries fast leaving no dulling residue, just spray and mop… no rinsing necessary. AEROGREEN® 4220 is safe for all hardwood, laminate, unwaxed and polyurethane finished wood floors, and is a non-toxic, low VOC waterborne formula that’s better for the environment.

DatasheetSDS

Aerogreen Solutions LLC.
1285 Brucetown Road
P.O. Box 0399
Clear Brook, VA 22624

P: (540) 450-8375
F: (540) 450-8379